Overview

A Solid Foundation: Because the foundation of a building is it's most important part, we take great care in how we build yours. We start with Pressure Treated 4x4 beams. These come with a limited life-time warranty against rotting, decay and termites. Next, we fasten 2x4 pressure treated joists on top of the 4x4's. These are spaced every 16" on center. We now cover this solid floor framing with T&G flooring. These 3 components combined give you the solid foundation that your shed needs and a floor strong enough to hold most anything- from your new Harley to your heavy drill press. Strong Wall Framing: Top-Grade Lumber is all we will use when framing your walls. These 2x4 wall studs are spaced every 16" on center to give your building the strength and durability it deserves. The wall studs are then covered with T-1-11 siding. This unique siding comes primed and has a 30 year warranty against delaminating or splitting. A Weather-Tight Roof: Your roof is constructed with engineered 2x4 rafters. These are then sheeted with 7/16" OSB panels for extra load capacity and layered with moisture proof #15 felt paper for additional protection. We then put a protective metal drip edge around the perimeter of the roof to seal out the weather and give your shed that finished look. Finally, we apply a heavy-duty 25-year Fiberglass Shingle. Whether you live on the mountains or on the plains, these roofs are designed and engineered to handle the wind and snow loads they may experience. This roof is rugged enough to withstand the elements and handsome enough to blend in with your home. * Our Basic Style is built 24" on center, and is cheaper from our other models. Ask a sales personnel for details on our Basic Style Construction.

Options

Option	Price	Image
Anchor, Installed	$45 each
Anchors	$35	View
Cupola, Unpainted Small (12x12)	$125	View
Cupola, Unpainted Large (24x24)	$275
4' Pine Double Door	$225	View
4' Pine Double Door w/ (2) Transom Windows	$375	View
Door, 3' Wooden Single	$95
Door, 3' Wooden Dutch Split	$125
Door, 4' Wooden Single	$125
Door, 4' Wooden Double	$125	View
Door, 6' Wooden Double	$195	View
Door, 6' Steel Panel Double	$250	View
Door, 8' Wooden Double	$250
Door, Single Steel W/Out Glass	$295
Door, Steel W/ Glass	$395	View
Floor, Joist on 12" Center	$1 per Sq ft
Floor, Pressure Treated	$2 per Sq ft
Floor, Insulated	$2.50 per Sq ft
Flower Box	$36
Loft	$5 per Sq ft
Latch, Keyed Door	$8.25
LoftPeg Board Panel	$2 per Sq ft
Ramps:
3'.....$80 5'.....$100 8'.....$140 4'.....$90 6'.....$110
Shelves	$7/Ft
Shutters	$55 per Set
Siding, Lap	$2.25 sq ft	View
Stairs, Pull Down (For Loft Area)	$295
Shingles, Heritage	$1 per Sq ft
Skylight, 14"x22"	$95	View
Skylight, Vented 50sq in	$75	View
Vent, 14" Turbine	$94
Vent, Ridge	$4/Ft
Vent, 3"x16" Air	$15	View
Vent, 6"x16" Air	$20	View
Vent, 6" Air (Round)	$25	View
Wall Height, 7'	$1.25 per Sq Ft.
Wall Height, 8'	$2 per Sq Ft.
Weather Vane	Call
Window, 3'x5' Oval Insulated	$625	View
Window, 18x23 Crank Out	$65	View
Window, 36x23 Crank Out	$85	View
Window, 24"x24" insulated slider w/ no grids	$150
Window, 24"x27" non insulated single hung w/ grids	$98	View
Window, 36"x36" insulated slider w/ no grids	$250	View
Window, 4'x3' Insulated slider w/ no grids	$375
Window, 18" non insulated octagon	$55	View
Window, 14"x21" non insulated w/ grids	$65	View
Window, Small Dormer W/Window	$250	View
Window, Small Dormer W/Out Window	$200
Window, 12" non insulated squ gable w/ grids	$50
Window, 10" non insulated round gable w/ grids	$50
Window, 14" non insulated half moon w/ grids	$50
Window, 30" non insulated half moon w/ grids	$75
Windows, Rough Opening	$50
Windows, Transom 3-Grids	$75
Windows, Transom 4-Grids	$85
Windows, Transom 5-Grids	$95
Work Bench	$7/Ft
X's on Door	$25 per Door

Pricing

Photos

Photo Slideshow

Shingle Colors

Standard Shingle Color Options (20 and 25 year 3-Tab) We have 5 shingle colors options that we offer standard with our sheds (included in price).You can click the image below for a better view of the colors. Color options: Upgraded 30 yr Dimensional Shingles The American Heritage Series of laminated fiberglass asphalt shingles by TAMKO® brings the rustic beauty of wood shakes to any home, with the added security of a U.L. listing for Class A fire resistance. Heritage® shingles have a rich Shadowtone granule blend that creates the elegant, dimensional appearance of wood, without the high cost or safety concerns.The random-cut design eliminates zipper patterns common with other laminated shingles. Click any of the images below for a better view.

Terms of Agreement

“Terms of Agreement” for all RMSB Inc, Structures. This agreement is between  the above named customer, and Rocky Mountain Storage Barns, Inc., herein referred to as RMSB, Inc.. I, the above said Customer,  understand and agree to the following: The standard pricing on all sheds include: Pressure Treated Skids, Wooden Floor, Double door, primed T-1-11 siding, full assembly, and shingled with 3-tab shingle. Additional building options or Customization from the above building features are available.  These additions or changes must be itemized on the invoice.  The customer is responsible for reviewing the invoice to assure that all issues that have been discussed have been documented. - RMSB, Inc. is not responsible for obtaining any surveys, ILC’s ,  satisfying any type of local homeowner covenants unless specified on the invoice numbered above, or anything required by the County or City to obtain the permit that is not detailed on the building plans and the invoice. Customer shall be responsible for any costs incurred due to required upgrades. RMSB, Inc. will obtain building permits required, unless customer desires otherwise. Permit & processing is billed at cost. -Any required ground anchors must be purchased separately; that should RMSB, Inc. be hired to install the anchors, that RMSB, Inc.  reserves the right to cancel the anchor installation and refund the anchoring fee in the event of frost or  rock, or any other obstruction that should hinder the installation of the anchors into ground. Should the Customer cancel this order, there is a restocking fee of 50% of retail value on orders already under construction. If construction has not yet begun, I am entitled to a refund of my deposit, minus any costs incurred by RMSB, Inc., Permit costs, and  any of its supplier’s or subcontractor’s, costs up to the date of the cancellation. RMSB, Inc. will do its best to expedite the erection/delivery of this building. However, should any unexpected delays occur, RMSB, Inc cannot be held liable for compensation, but will work with the Customer to expedite the completion of this building. All listed sizes can vary a few inches, and are built  according to the standard display models, unless stated otherwise on invoice. It is the Customer’s responsibility to have the building site level, and ready before the driver/ Installer arrives. I, the Customer, must reschedule delivery in advance if I am not prepared.  RMSB, Inc. charges $50 per hour if the driver/ Installer must wait at the delivery site for me to finish preparing the site, and that I am responsible for incurred freight charges if he returns with the building due to the above. The driver/ Installer will not unload my building, and /or building materials on the day of delivery / installation unless he can establish phone contact with the Customer. Neither RMSB, Inc, nor the driver / Installer, nor any of its affiliates and subcontractors is responsible for damage to Lawns, Trees, Fences, Driveways, Sprinkler systems ,Septic systems, Roads, et cetera, resulting from normal craning, construction, and delivery procedures, unless RMSB,Inc., the driver / Installer accesses the site without the customer’s permission or doesn’t follow Customer’s directions. Freight charges are relative to our sales lot, located at 1201 E. Mulberry Street, Fort Collins CO ,  and that RMSB, Inc. is not responsible for extra freight miles resulting from detours, road restrictions, et cetera. The charge for freight is as follows: the 1st 20 miles are free, then it is $4 per loaded mile (unless it is a 14’ wide building, then it is $5 per loaded mile.).  RMSB, INC. nor any of its subcontractors will be held liable for damage to customer’s electrical system due to normal use. Should customer make any changes to this order after permit has been applied for, RMSB, Inc. will charge a fee of $150.00 per instance plus any charges the County or City may charge. Should Customer fail to pay as agreed upon in this contract, Customer shall pay all collection, Court, litigation, attorney, or any other fees incurred, plus a late payment fee of $ 90.00 and may be charged an interest rate of 2% per month on the balance.  “Payment in Full” is due upon delivery and / or completion of this building. This Building remains the property of RMSB, Inc. until it is paid in full and shall not be used by the customer.  To place an order a 50% deposit is required.  Final payment is due upon completion of work sold by RMSB, Inc. Download Terms of agreement here